RidgescanAI
Learn

Well water testing in the Treasure Valley

Outside the city systems, a lot of Valley homes draw from a private well. Nobody tests that water for you. Here is what a home inspection covers, what it doesn't, and what to order.

Plain-language guidance for buyers and the agents helping them, not a lab or a regulator. Where a program is named, check its current rules.

What a home inspection covers on a well

The Ridgescan Standard, like the InterNACHI standard it builds on, covers the visible parts of the water supply: the well cap and casing where accessible, the pressure tank, the pressure switch, visible piping, and functional flow at the fixtures. The inspector runs water and records static pressure. That tells you the system delivers water today.

It does not tell you what is in the water. Water quality is a laboratory question, and a visual inspection can't answer it. A Ridgescan report on a well-served house says so in the plumbing section and recommends testing.

What to order

  • Total coliform and E. coli. The basic safety screen. A positive total-coliform result means the well is open to surface contamination; E. coli means it is open to sewage. Either one is a repair-and-retest item, not a judgment call.
  • Nitrate. Agricultural ground and septic density make nitrate the common Valley concern. It matters most for infants and pregnancy, and the health limit is a hard number, not a range.
  • Arsenic. Southern Idaho groundwater carries naturally occurring arsenic in places. Treatment exists; the test is cheap compared to finding out later.
  • Hardness, iron, manganese, pH, total dissolved solids. Not health items, but they explain stained fixtures, scaled heaters and bad taste, and they size any softener or filter a seller claims to have handled.
  • Fluoride, uranium, radon in water where a neighbor's result or the geology suggests it. Ask the lab what they see in that part of the Valley.

Use a lab certified for drinking-water analysis; the Idaho Department of Environmental Quality publishes the list. Follow the lab's sampling instructions exactly: a bacteria sample taken from a hose bib or a filtered tap is a wasted sample.

Reading the results

Each line shows the measured value, the unit and the limit the lab compares it to. Values above a health-based limit are a condition to resolve before closing or to price into the deal. Values above a secondary (aesthetic) limit are a treatment-and-maintenance conversation. A clean bacteria result on one day does not guarantee the next; wells with a history of positives should be shock-chlorinated and retested, and the cause (a cracked cap, a nearby septic field, a shallow casing) found.

Fitting it in the contingency window

Bacteria results take a day or two; a full chemistry panel can take a week or more. Order the sample the day the inspection is scheduled, not after the report arrives. If the window is tight, the bacteria and nitrate screen first, the rest as a seller-paid condition if the screen is clean.

Where Ridgescan fits

Water-quality testing is not part of the Ridgescan Standard today; it is on the list of conditional modules we add as certified partners come on. Until then the report tells you when a house is on a well, records what the visible system shows, and recommends the test. If you want a hand choosing a lab, write to us.

Get started

Book an inspection.

Tell us about the property and when you need the report. We'll confirm a time by email.

  • Emailhello@ridgescan.ai
  • Based inEagle, Idaho · serving the Treasure Valley
  • Certified inspectorsReview and sign remotely with Ridgescan. Ask us how.
We'll only use your email to reply to this request.