Ridgescan sells and leases no hardware. The app asks for what the tools in your hand can give and skips what they can't, so start with what you have and add a layer when it pays for itself. Here is what each layer needs, what class of device does it, and what the report gets from it.
Device classes, not brands: any current model in the class works with the app, because the app takes the files, not a feed. Prices change; we don't print them.
| Layer | What to carry | What the report gets |
|---|---|---|
| Phone | Any recent iPhone or Android. The app runs in the browser and installs to the home screen; it works with no signal. | A photo for every item on the standard, the readings typed in, the seller's authorization, and the on-site check that tells you to retake a bad frame.Required on every job |
| Instruments | A water pressure gauge with a hose-bib thread, a GFCI/AFCI outlet tester, an infrared thermometer, a CO meter, a pin moisture meter. A manometer if you want static pressure. | Readings against their normal ranges: static water pressure, heating rise and cooling split, CO at every fuel-fired appliance, moisture at any thermal anomaly.A few hundred dollars for the set |
| 360° camera | A consumer 360° camera (Insta360 or Ricoh class). One shot per room from chest height; export to the phone through the maker's app, then share into Ridgescan. | Every room as it was that day, tied to the room; the inspector revisits any corner during review and the engine judges every item from the frames.A few hundred dollars |
| Thermal camera | A handheld radiometric thermal camera. Phone-attached (FLIR One Pro or Topdon class) to start; a standalone FLIR E-series when the volume justifies it. It must save radiometric files, not screenshots. | A thermal sweep of every wall, ceiling and system; moisture, missing insulation and overheating circuits shown as temperature, confirmed with the moisture meter.Low hundreds phone-attached; low thousands standalone |
| Drone | A consumer drone (DJI Mini or Mavic class) and an FAA Part 107 remote pilot certificate for whoever flies it: an online course and a test at a testing centre, no flight exam. One pilot per office is enough. | The whole roof from above: coverings, flashing, penetrations, gutters, chimney. Steep, wet and tile roofs are flown, not skipped.Drone from the mid hundreds; the certificate is a short study |
| Crawlspace rover | A tracked crawlspace rover with lights and a camera, driven from a tablet (UplinkRobotics Wombat class). The app lists the checkpoints: perimeter corners, piers, under each wet room, ground cover, wood and soil. | The crawlspace end to end without sending a person under the house; stills at every checkpoint on the record.Low thousands; the one purchase to time against volume |
| Lidar (optional) | An iPhone Pro (12 Pro or later) with a scanning app, or a Matterport if the office already has one. One room scan per room beside the 360°. | A floor plan with measured room dimensions and square footage, findings pinned to where they are, and a dimensional record of the house.Often already in the pocket |
Cost classes are rough and change; check current prices before buying. Ridgescan has no affiliation with any maker and earns nothing on what you buy. The report states on its scope line which layers a job had.
The first two layers cost little and change the report the most: every item photographed and every reading measured. The 360° camera is next because it puts every room on record for the inspector and the engine. Thermal is the layer buyers notice. The drone and the rover come when the volume pays for them, and until then the roof and crawlspace are covered from the ground, the attic and the access, with the scope stated on page one.
Tell us about the property and when you need the report. We'll confirm a time by email.