Terms of service and scope of inspection
Effective September 29, 2026. These terms apply to every inspection, capture and report provided by Ridgescan AI ("Ridgescan," "we").
1. What we do
Ridgescan provides visual and instrument-based condition documentation of residential property, and reports based on that documentation. Every Ridgescan inspection follows the Ridgescan Standard (version 1), which covers every item in the InterNACHI Residential Standards of Practice and adds instrument readings, a thermal sweep, 360° views of every room and, where the house has one, crawlspace rover coverage; every report is reviewed and signed by a certified home inspector (InterNACHI or ASHI), whether the on-site capture is performed by our team or by a real estate agent using our application (section 4).
2. What an inspection is and isn't
- An inspection is a non-invasive, visual and instrument-assisted examination of readily accessible systems and components on the day of the inspection. It is not a guarantee, warranty or insurance policy on the condition of the property.
- We do not move furniture, stored items, insulation or finishes, and we do not open walls. Thermal imaging shows temperature differences at the surface; it does not see through materials. A thermal finding is an indicator that warrants confirmation, not a diagnosis.
- The State of Idaho does not require home inspectors to be licensed. Every Ridgescan report is reviewed and signed by a certified home inspector (InterNACHI or ASHI).
- Items that need a closer look are referred to the appropriate licensed or registered trade (electrician, plumber, roofing contractor, HVAC technician or structural engineer). A referral is a recommendation, not a finding of defect, and the trade's evaluation controls.
- Code compliance, permits, environmental hazards (other than radon where ordered), pests, appliances not listed in the SoP, and cosmetic conditions are outside scope unless stated in the report.
3. AI-assisted reports
Our reports are drafted with the assistance of automated systems that check captured evidence against the SoP and draft findings. Every report is reviewed and signed by a human inspector before delivery, and no report is delivered without that sign-off. The signing inspector is responsible for the report's content.
4. Agent-run captures
- An agent-run capture is an inspection in which the on-site capture is performed by a licensed real estate agent using Ridgescan's guided application, then reviewed remotely and signed by a Ridgescan inspector.
- It is performed at a disclosed scope, and every report states that scope on its first page. Buyers may order their own inspection at any time.
- The property owner or their authorized representative must authorize each capture in the application before it begins. On the buyer side, authorization runs through the listing agent.
5. Drone, rover and instruments
Drone flights are conducted by an FAA Part 107 remote pilot, remain over the subject property and adjacent public airspace, and comply with applicable FAA rules and temporary flight restrictions. Weather, airspace restrictions or safety may prevent a flight on the day; if so, the report says so and the roof is inspected by other means. The crawlspace rover and handheld instruments are operated to avoid damage; if a space cannot be safely accessed, the report says so.
6. Repair cost quotes
Where requested, findings are provided to an independent registered general contractor for a written estimate. Ridgescan receives no fee, commission or other compensation from any contractor, and has no ownership interest in any contractor to which it refers. Estimates are the contractor's own, and you are free to obtain others.
7. Your consent to capture and data use
By ordering or authorizing an inspection or capture, you consent to Ridgescan collecting photographs, 360° imagery, thermal imagery, video, sensor readings, test results and property information ("Capture Data"), and you grant Ridgescan a perpetual, irrevocable, worldwide license to store and use Capture Data, in identified and de-identified form, for the purposes described in our Privacy Policy, including delivering your report, improving our systems, property risk assessment, underwriting and insurance-related analysis, and licensing of derived property-condition data to third parties. Your name and contact details are never included in licensed data. See the Privacy Policy for details and your choices.
8. Fees and cancellation
Clients accept the pre-inspection agreement when they book; it restates scope, fee, cancellation and remedy for that inspection. Fees are quoted before scheduling and are based on the home's square footage and any add-on services. Payment is due on delivery of the report unless agreed otherwise. Inspections cancelled with less than 24 hours' notice may be charged a trip fee.
9. Limitation of liability and remedy
- Our reports reflect conditions observed on the day of inspection. Conditions change, and concealed conditions may exist that were not visible or accessible.
- To the maximum extent permitted by law, Ridgescan's total liability arising from an inspection or capture is limited to the fee paid for that service. We are not liable for consequential, incidental or indirect damages, including repair costs, loss of value or lost transactions.
- Any claim must be reported to us in writing within 14 days of discovery and before the condition is repaired or altered, so that we may re-inspect.
- Any dispute will be resolved by binding arbitration in Ada County, Idaho, under Idaho law, except that either party may bring a claim in small claims court.
10. Use of the report
The report is prepared for the client who ordered it. Sharing the report with others is permitted, but third parties rely on it at their own risk and are not clients of Ridgescan. Every report carries a scope statement that must not be removed when shared.
11. Changes
We may update these terms. The version in effect on the date of your inspection governs that inspection. Questions: hello@ridgescan.ai.