RidgescanAI
For home buyers & owners

Know the house before you're the one who owns the problem.

Drone over the roof, thermal on every wall, a rover through the crawlspace and 360° of every room. AI checks the capture against the Ridgescan Standard, item by item. A certified inspector reviews and signs. Your report arrives the same day.

The Ridgescan Standard, every jobSigned by a certified home inspectorSame-day report
Buyers, sellers, owners

The two places water does the most damage get the least attention.

For buyers under contract, sellers preparing to list, owners who want a baseline, and buyers of new construction who've been told it doesn't need one.

What usually goes wrong

  • The crawlspace and roof get skipped.Too tight, too steep, too wet. The two places water does the most damage get the least attention.
  • The report says "have it looked at."You're left to figure out by whom, how urgently, and what it means for your offer.
  • Days go by before you see anything.Contingency windows don't wait for a report.
  • New homes get no inspection at all."It's new" isn't the same as "it was built right," and builder warranties have a clock on them.

What Ridgescan does instead

  • The rover drives the crawlspace and the drone flies the roof.Every inspection, no exceptions, no extra charge.
  • Every finding names the trade.Electrician, plumber, roofer, HVAC or structural engineer, with the photo and thermal image attached so they know what they're walking into.
  • Your report arrives the same day.AI-assisted, reviewed and signed by your inspector before it's sent.
  • New construction is a specialty.Delivery inspections and 11th-month warranty inspections, timed so you can file claims before coverage ends.
Book an inspection →See a sample reportPriced by square footage, everything included. Contact us for a quote.
The tools

The whole house.
Not just the reachable parts.

Every inspection gets the full set of tools, at one price. The person holding it changes, the standard doesn't: a Ridgescan inspector, an agent with the office's tools, or a licensed inspection company running the Ridgescan Standard on its own jobs. Each layer adds something a person standing in the room can't see.

01 · Where a standard inspection stops

Visual, from wherever a person can stand.

The Standards of Practice call for a visual inspection of what's readily accessible. Roofs get viewed from the ground, crawlspaces get "limited access" in the report, and what's behind the walls stays a guess.

Readily accessibleVisual only
02 · The roof, from above

Every plane, ridge and flashing.

A drone flies the whole roof. Steep, wet or high roofs are flown, not skipped, and gutters, grading and drainage get the same view. Flown by an FAA Part 107 certified remote pilot.

Roof planesFlashing & penetrationsGutters & grading
03 · Behind the walls

Moisture and missing insulation, made visible.

A handheld radiometric thermal camera on every wall, ceiling and system. Moisture, insulation gaps and hot circuits show up as temperature. Every image carries the data, not just the picture.

RadiometricEvery wall & ceilingPanels & registers
04 · Under the floor

The crawlspace, end to end.

A rover drives the full crawlspace: foundation, framing, plumbing, ducts and moisture, in spaces a person can't safely enter. Standard on every job, not an add-on.

FoundationFramingVapor barrierStanding water
05 · Every room, as it was that day

Nothing out of frame.

A 360° of every room. The inspector can revisit any corner during review, and you keep a record of the house as it was on inspection day.

Every roomEvery level
06 · Checked before anyone leaves

AI catches the gaps on site.

Every capture is scored against the Ridgescan Standard while the crew is still at the property. A missing test or photo is a prompt on the phone, not a footnote in the report.

48 items10 sectionsCaught on site
The AI

One standard. Every job.
Enforced by software, signed by a person.

The inspection list is the source of truth. Every prompt on the phone, every completeness check, every finding and every line of the report comes from the same schema, built on the Ridgescan Standard (every item in the InterNACHI Residential Standards of Practice, plus instrument readings, thermal and subsurface capture). AI scores the capture and drafts the findings. A certified inspector reviews and signs. Nothing is delivered without that signature.

completeness engineillustration
    Property
    scoring…
    0inspection items, each with its own evidence requirement
    0Ridgescan Standard sections, roof to garage door
    1certified inspector's signature on every report, no exceptions
    0reports delivered without it. It isn't possible in the software
    01 · Capture

    Guided, item by item

    The app tells the person on site exactly what to capture, and won't close the job with gaps.

    02 · Score

    Checked against the standard

    AI checks every item for the evidence it requires: photos, 360°, thermal, readings and tests.

    03 · Draft

    Findings, with evidence attached

    Flagged items are drafted in plain language with the photo, thermal image and location.

    04 · Review & sign

    A person decides

    A certified home inspector edits, approves and signs. Then, and only then, it's delivered.

    Same house, two inspections

    What a typical inspection covers, and what Ridgescan adds.

    A typical home inspection is a visual look at what is readily accessible, written to a trade-association standard. Ridgescan follows every item in that standard and then goes where eyes can't: over the roof, under the floor, behind the drywall, and into the numbers.

    Typical inspectionRidgescan
    The standardA visual standard of practice (InterNACHI or ASHI). Idaho doesn't require home inspectors to be licensed, so the standard is whatever the inspector chooses to follow.The Ridgescan Standard: every item in the InterNACHI Residential Standards of Practice, plus instrument readings, a thermal sweep, 360° of every room and the crawlspace rover. The same list on every job.
    RoofViewed from a ladder, the eaves or the ground. Steep, wet or tile roofs are often "not walked".Drone flight over the whole roof, every time: coverings, flashing, penetrations, gutters, chimney, from above.Captured with: Drone, flown by an FAA Part 107 remote pilot
    CrawlspaceEntered if there is room and it is dry. "Limited access" is a common line in the report.The rover drives it end to end: foundation, piers, framing, plumbing, vapor barrier, wood-soil contact, moisture.Captured with: Crawlspace rover, driven from a tablet; a 360° camera at the access where there is no rover
    Behind walls and ceilingsNot inspected. Visual only.Radiometric thermal sweep of every wall, ceiling and system. Moisture, missing insulation and overheating circuits show up as temperature, then get confirmed with a moisture meter.Captured with: Handheld radiometric thermal camera; pin moisture meter to confirm
    Systems that have numbers"Operated with normal controls." Judged by observation, not measured.Measured and recorded against a normal range: heating rise and cooling split, static water pressure, CO at every fuel-fired appliance, moisture at every anomaly. The numbers print in the report.Captured with: Water pressure gauge, infrared thermometer, CO meter, manometer, moisture meter
    Electrical testsRepresentative outlets tested; the panel opened if safe.Every reachable GFCI and AFCI tested and the result recorded; the panel photographed cover off; thermal on the panel and breakers.Captured with: GFCI/AFCI outlet tester; phone camera; thermal camera on the panel
    DocumentationPhotos of what the inspector chose to photograph.360° of every room, every photo and thermal frame, each tied to the item it covers and kept on record. An evidence record, not an album.Captured with: 360° camera, one capture per room; phone camera for every item
    CompletenessDepends on the inspector's own checklist and the time available.Software checks every item on the Ridgescan Standard against its evidence before anyone leaves the property. A gap gets filled while the crew is still there.Captured with: The Ridgescan app, scoring on site
    Who signsThe person who walked the house; certifications vary from inspector to inspector.A certified home inspector reviews every finding against the evidence and signs with their certification id. The AI drafts; a person signs.Captured with: Remote review on a laptop
    Report timingOne to three days.Same day, reviewed and signed. Your contingency clock keeps its days.Captured with: The engine drafts; the inspector signs from a laptop
    What a finding saysOften a line like "recommend further evaluation by a qualified contractor."The photo, the thermal image, the reading, the location, a priority (Safety, Major, Maintenance, Monitor) and the licensed or registered trade to call.Captured with: Every tool above, tied to the item
    For your agentA PDF to read through and summarize.A repair-request summary: Safety and Major items with location and trade, ready for an addendum. Quotes from independent contractors on request, with no fee to Ridgescan.
    Time on siteAbout 2½ to 4 hours for a typical Treasure Valley home, then 1 to 2 hours writing the report that evening.*About 2 to 2½ hours with the full set of tools, or 60 to 90 minutes for an agent capturing the interior; no writing on site. The engine drafts and the inspector reviews remotely in about 30 to 45 minutes.*Captured with: the app doing the deciding and the note-taking
    After repairsBook another inspection.A flat-fee re-inspection of the flagged items only, with before-and-after in one record.

    What each row is captured with is on our recommended-tools list; Ridgescan sells and leases no hardware. * Time estimates are projections for a typical Treasure Valley home, built from the capture steps; we will publish measured times from completed jobs. "Typical" describes the visual standard of practice most inspections are written to and common practice in the Treasure Valley; individual inspectors vary. Thermal imaging and instrument readings indicate conditions that warrant confirmation; they are not a diagnosis.

    Inspection day

    What happens on site.

    Five steps, one standard. The order changes with the house; the checklist doesn't.

    01 · AIR

    Drone flight

    Roof, flashing, penetrations, gutters, grading and drainage from the air.

    Part 107 pilot
    02 · INTERIOR

    Guided walk

    Item by item through the inspection list: 360° per room, thermal on every wall, ceiling and system, plus the required tests.

    48 items
    03 · UNDER

    Rover crawl

    Foundation, framing, plumbing, ducts, wiring and moisture under the floor.

    End to end
    04 · CHECK

    Completeness check

    Every item is checked against the list, and gaps are caught before anyone leaves the property.

    On site
    05 · DELIVER

    Same-day report

    AI-assisted, reviewed and signed by your inspector. Nothing is delivered without that sign-off.

    Signed · same day
    The report

    A report you can act on.

    • Built on the Ridgescan Standard.Every required section, every time, with the scope stated on page one.
    • Evidence with every finding.Photo, thermal image and location, so there's no guessing what was meant.
    • Sorted by what matters.Safety, major, maintenance and monitor, with budgetary ranges so you can plan and negotiate.
    • Referred to the right trade, not another inspection.Electrician, plumber, roofer, HVAC technician or structural engineer.
    • A repair-request summary your agent can use.Safety and major items with location and requested action, ready for an addendum.
    Repair-priority matrixsample · not a real property
    SafetyKitchen GFCI didn't trip on testKitchen counter · licensed electrician$120–250
    MajorBath exhaust venting into the atticAttic above primary bath · HVAC technician$300–600
    MajorElevated moisture, thermal anomalyGuest bath wall · licensed plumber$500–3,000
    Maint.Negative grading at NE cornerExterior · general contractor$300–1,200
    MonitorWater heater at 9 yearsGarage · budget for replacement—
    Budgetary ranges, not bids.See the full report →
    Beyond the inspection

    Services that attach to a capture.

    When you need more than the report, the same evidence keeps working for you.

    Repair cost quotes

    Findings from your report go to an independent registered general contractor for a written repair estimate. Ridgescan takes no referral fee or compensation from the contractor, and that's disclosed in writing. You get a number to negotiate with, not a guess.

    Pre-listing advisory

    For sellers and listing agents: a capture before the home goes to market, a prioritized list of what a buyer's inspector will flag, and repair quotes for the items worth fixing first. Fix, credit or disclose on your terms.

    New-construction phase inspections

    Pre-pour, pre-drywall, final walk and 11th-month warranty. Code minimum isn't the same as built right, and the city inspector isn't working for you. The pre-drywall capture becomes a permanent record of what's inside the walls.

    Radon testing Coming soon

    Continuous radon monitoring during the inspection window, run by a certified radon measurement professional. Idaho has areas of elevated radon, and the only way to know a house is to test it.

    Service area

    Based in Eagle.
    Serving the Treasure Valley.

    EagleBoiseMeridianStarKunaNampaCaldwell

    Priced by square footage

    One inspection, one price. Every capture method is included. Contact us for a quote.

    Drone roof & exteriorincluded
    Thermal imagingincluded
    360° documentationincluded
    Crawlspace roverincluded
    Same-day signed reportincluded
    FAQ

    Questions buyers and owners ask first.

    How long is the inspection?

    Our estimate for a typical Treasure Valley home is about 2 to 2½ hours on site with the full set of tools, and the report is reviewed, signed and delivered the same day. A traditional inspection runs about 2½ to 4 hours on site, with the report written that evening and delivered a day or more later. Estimates built from the capture steps; we will publish measured times from completed jobs.

    What does "same day" actually mean?

    The report is delivered the day of the inspection, after the inspector reviews and signs it. The AI drafts, a person signs, and nothing goes out without that sign-off.

    What happens when you find something?

    The finding is written up with its photo, thermal image and location, and referred to the right licensed trade: electrician, plumber, roofer, HVAC technician or structural engineer. We don't refer you to another inspection.

    Do you really put a rover in every crawlspace?

    Yes, on every full-service inspection. It's part of part of every inspection, not an add-on, and it reaches areas a person can't safely enter.

    Do I need to be there for the drone?

    No. The flight is short and stays over the property. The seller or listing agent authorizes the capture before it starts, and it's flown by an FAA Part 107 certified remote pilot.

    What does the AI do, and what does it not do?

    It checks that every item on the Ridgescan Standard (every item in the InterNACHI Residential Standards of Practice, plus instrument readings, thermal and subsurface capture) has the evidence it requires, flags what's missing while we're still on site, and drafts findings in plain language from the photos, thermal frames and readings. It does not decide what goes in your report. A certified inspector reviews every draft, edits it, and signs it.

    How is it priced?

    By the home's square footage. One price covers every capture method and the report. Contact us for a quote.

    Where do you work?

    Eagle, Boise, Meridian, Star, Kuna, Nampa and Caldwell. If you're just outside that, ask.

    Get started

    Book an inspection.

    Tell us about the property and when you need the report. We'll confirm a time by email.

    • Emailhello@ridgescan.ai
    • Based inEagle, Idaho · serving the Treasure Valley
    • Certified inspectorsReview and sign remotely with Ridgescan. Ask us how.
    We'll only use your email to reply to this request.