RidgescanAI
Report guide

How to read your Ridgescan report.

The report is written to be read without a translator. This page explains the codes, the priority tags, the readings marked Beyond SoP, what a thermal image can tell you, and what the signature at the end means.

Condition codes

Four codes, one per item.

Every item in every section carries one of these. They follow InterNACHI usage, so an inspector anywhere reads them the same way.

INInspected

The item was inspected and no material defect was observed. The evidence for it is still in the report.

DDeficient

A deficiency was observed. It gets a finding: what was seen, where, what it means, what to do, and which trade to call.

NINot Inspected

The item could not be inspected and the limitation is written down: locked, blocked, buried, energized, unsafe, or outside the scope.

NPNot Present

The house doesn't have one. No fireplace, no sump pump, no attached garage. Recorded so you know it was looked for.

IN doesn't mean "new" or "perfect." It means the item was examined to the standard and nothing rose to a deficiency on the day. A ten-year-old water heater that works is IN, and it will also show up under Monitor.

Priorities

What Safety, Major, Maintenance and Monitor mean.

Every finding gets one tag. The repair-priority matrix near the front of the report sorts them so the first page of findings is the one that matters most.

The tag is the inspector's judgment on the day, with the evidence attached. What to ask the seller for is the buyer's and the agent's call; the report's repair-request summary gathers the Safety and Major items so that conversation starts from a list.

Beyond SoP

Readings a visual inspection doesn't take.

The InterNACHI Standards of Practice the Ridgescan Standard is built on describe a visual inspection of readily accessible systems. The Ridgescan Standard adds instruments to every job. What they produce is reported as what was measured, next to its normal range, never as a diagnosis.

What the instruments add

  • Thermal frames.Radiometric images of walls, ceilings, panels and registers, each pixel carrying a surface temperature.
  • Instrument readings.Wood moisture content in the crawlspace, static water pressure, the supply/return temperature split at the air handler, ambient CO at the furnace.
  • Service-life estimates.Where the inspector offers one, it is an estimate from age and condition, not a prediction.
  • Drone and rover imagery.Views of the roof and crawlspace that a person standing on the ground, or at the hatch, wouldn't get.

Why it's labeled

  • So you know what's standard and what's extra.Another inspector's report may not include these, and that's not a shortfall on their part.
  • So a reading isn't mistaken for a diagnosis.A reading is a number on a day. The trade confirms what's behind it.
  • So the scope on page one stays honest.The report says what was inspected to the standard, and separately what was measured beyond it.
Thermal imaging

What a thermal image can and can't show.

Thermal is the most useful instrument we carry and the most misread one. Three rules keep it honest.

What it shows

  • Surface temperature differences.A wet patch of drywall is cooler than the dry wall around it because water evaporates. A missing bay of insulation shows as a warm or cold stripe. A loaded breaker runs warmer than its neighbors.
  • Patterns, not just spots.Moisture tends to track from a source and widen downward. Air leakage fans from a gap. Missing insulation follows the framing.
  • Where to put the moisture meter.On every Ridgescan job a thermal anomaly that looks like moisture is checked with a meter, and the reading is in the report.

What it can't show

  • Anything through a wall.Thermal reads the surface. It doesn't see pipes, wiring or framing; it sees their effect on surface temperature when there is one.
  • Mold, or the cause of a leak.It can point at a wet area. What's growing there and why it's wet take the right trade.
  • A problem when there's no temperature difference.A dry day with the HVAC off and the house at the outside temperature hides a lot. The inspector notes conditions at the time of capture.

A thermal finding in a Ridgescan report is an indicator that warrants confirmation, not a diagnosis. That's why each one names a trade and carries the meter reading next to it. Read more: Thermal imaging, what it finds and what it can't.

Ranges, referrals and the signature

The three things people ask about most.

Budgetary ranges: planning numbers, not bids

Each finding in the matrix carries a range. It is there so a buyer can plan and an agent can negotiate with a number instead of a shrug. It is not a quote. Materials, access, what the trade finds when they open it up, and who you hire all move the real price. Get written quotes from registered contractors before you rely on a number.

Referrals and the repair-quote service

Every deficiency is referred to the right licensed or registered trade: electrician, plumber, roofer, HVAC technician, structural engineer, general contractor, chimney sweep or garage door technician, with the photo, thermal frame and location attached. If you'd rather not chase quotes, ask us: the findings go to an independent registered general contractor for a written estimate. Ridgescan takes no referral fee or other compensation from that contractor, and that's disclosed in writing wherever quotes appear.

What the sign-off block means

The last page carries the reviewing inspector's name, certified home inspector certification number and the date and time of signature, plus the report version. It means a person, not software, read the capture, edited the draft findings and took responsibility for what's in the report. The AI drafts; the inspector decides. A report without that block is a draft, prints with a DRAFT watermark, and is never delivered. Idaho doesn't require home inspectors to be licensed, which is why the certification and the signature matter.

What the limitations section is for

A home inspection is non-invasive and visual, with instruments added where Ridgescan brings them. It isn't technically exhaustive, isn't a code-compliance inspection, isn't a warranty, and can't find what's concealed. The limitations section says that plainly so nobody reads more into the report than it can carry.

Re-inspection after repairs

Once the trades have done their work, we can come back and document the repaired items on the same record. Contact us to schedule.

Get started

Book an inspection.

Tell us about the property and when you need the report. We'll confirm a time by email.

  • Emailhello@ridgescan.ai
  • Based inEagle, Idaho · serving the Treasure Valley
  • Certified inspectorsReview and sign remotely with Ridgescan. Ask us how.
We'll only use your email to reply to this request.