Your agents capture the home with a guided app whenever they're already at the property. AI checks every item against the Ridgescan Standard before they leave. A certified inspector reviews it remotely and signs. The report comes back the same day, with its scope stated on page one.
Listing side or buyer side, the capture is the same. What changes is what you do with it.
The seller authorizes, the agent captures, AI checks, an inspector signs.
Every agent-run capture is an inspection at a disclosed scope, reviewed and signed by a certified home inspector. The report states its scope on the first page. The seller authorizes every capture in the app before it starts.
Every inspection gets the full set of tools, at one price. The person holding it changes, the standard doesn't: a Ridgescan inspector, an agent with the office's tools, or a licensed inspection company running the Ridgescan Standard on its own jobs. Each layer adds something a person standing in the room can't see.
The Standards of Practice call for a visual inspection of what's readily accessible. Roofs get viewed from the ground, crawlspaces get "limited access" in the report, and what's behind the walls stays a guess.
A drone flies the whole roof. Steep, wet or high roofs are flown, not skipped, and gutters, grading and drainage get the same view. Flown by an FAA Part 107 certified remote pilot.
A handheld radiometric thermal camera on every wall, ceiling and system. Moisture, insulation gaps and hot circuits show up as temperature. Every image carries the data, not just the picture.
A rover drives the full crawlspace: foundation, framing, plumbing, ducts and moisture, in spaces a person can't safely enter. Standard on every job, not an add-on.
A 360° of every room. The inspector can revisit any corner during review, and you keep a record of the house as it was on inspection day.
Every capture is scored against the Ridgescan Standard while the crew is still at the property. A missing test or photo is a prompt on the phone, not a footnote in the report.
Some brokerages already own a Matterport. Some agents have an iPhone Pro with lidar in their pocket. A 360° camera is the cheapest way to get every room on record. Here is what each one adds to the report, and what Ridgescan does with it.
| Typical | With Ridgescan | |
|---|---|---|
| Phone only | Photos of what the person chose to photograph. | The app asks for a specific photo for every item on the standard, scores each one on site and tells you to retake a bad one while you're still in the room. A complete inspection at a stated scope. |
| 360° camera | A virtual tour for the listing. | One capture per room, tied to the room and the items in it. The inspector revisits any corner during review; the engine judges every item from the frames; the buyer keeps the house as it was that day. |
| iPhone Pro lidar | A room scan in a scanning app, kept on the phone. | A room scan beside each 360°: a floor plan with measured room dimensions and square footage, findings pinned to where they are, and a dimensional record of the house. No new hardware if the phone is already in the bag. |
| Matterport | A tour and, on the lidar model, a floor plan, for marketing. | If the brokerage already has one, its tour links to the job and its floor plan stands in for the lidar scan. Ridgescan adds what the tour doesn't have: the standard, the readings, the thermal sweep, the findings, and a signed report. |
| Thermal camera | Rarely carried. | A sweep of every wall, ceiling and system; anomalies confirmed with a moisture meter and reported as what was measured. |
| Drone and rover | Not part of a typical inspection. | On every Ridgescan job: the whole roof from above and the crawlspace end to end. Flown by a Part 107 pilot and driven from a tablet, by whichever operator holds the tools: a Ridgescan inspector, a brokerage's own pilot with the office's tools, or a licensed inspection company on its own jobs. |
A tour shows a house. Ridgescan measures it, judges it against a standard and signs the result, on one record per home. Square footage from a scan is stated with its method and tolerance; it is not an appraisal.
The inspection list is the source of truth. Every prompt on the phone, every completeness check, every finding and every line of the report comes from the same schema, built on the Ridgescan Standard (every item in the InterNACHI Residential Standards of Practice, plus instrument readings, thermal and subsurface capture). AI scores the capture and drafts the findings. A certified inspector reviews and signs. Nothing is delivered without that signature.
The app tells the person on site exactly what to capture, and won't close the job with gaps.
AI checks every item for the evidence it requires: photos, 360°, thermal, readings and tests.
Flagged items are drafted in plain language with the photo, thermal image and location.
A certified home inspector edits, approves and signs. Then, and only then, it's delivered.
A typical home inspection is a visual look at what is readily accessible, written to a trade-association standard. Ridgescan follows every item in that standard and then goes where eyes can't: over the roof, under the floor, behind the drywall, and into the numbers.
| Typical inspection | Ridgescan | |
|---|---|---|
| The standard | A visual standard of practice (InterNACHI or ASHI). Idaho doesn't require home inspectors to be licensed, so the standard is whatever the inspector chooses to follow. | The Ridgescan Standard: every item in the InterNACHI Residential Standards of Practice, plus instrument readings, a thermal sweep, 360° of every room and the crawlspace rover. The same list on every job. |
| Roof | Viewed from a ladder, the eaves or the ground. Steep, wet or tile roofs are often "not walked". | Drone flight over the whole roof, every time: coverings, flashing, penetrations, gutters, chimney, from above.Captured with: Drone, flown by an FAA Part 107 remote pilot |
| Crawlspace | Entered if there is room and it is dry. "Limited access" is a common line in the report. | The rover drives it end to end: foundation, piers, framing, plumbing, vapor barrier, wood-soil contact, moisture.Captured with: Crawlspace rover, driven from a tablet; a 360° camera at the access where there is no rover |
| Behind walls and ceilings | Not inspected. Visual only. | Radiometric thermal sweep of every wall, ceiling and system. Moisture, missing insulation and overheating circuits show up as temperature, then get confirmed with a moisture meter.Captured with: Handheld radiometric thermal camera; pin moisture meter to confirm |
| Systems that have numbers | "Operated with normal controls." Judged by observation, not measured. | Measured and recorded against a normal range: heating rise and cooling split, static water pressure, CO at every fuel-fired appliance, moisture at every anomaly. The numbers print in the report.Captured with: Water pressure gauge, infrared thermometer, CO meter, manometer, moisture meter |
| Electrical tests | Representative outlets tested; the panel opened if safe. | Every reachable GFCI and AFCI tested and the result recorded; the panel photographed cover off; thermal on the panel and breakers.Captured with: GFCI/AFCI outlet tester; phone camera; thermal camera on the panel |
| Documentation | Photos of what the inspector chose to photograph. | 360° of every room, every photo and thermal frame, each tied to the item it covers and kept on record. An evidence record, not an album.Captured with: 360° camera, one capture per room; phone camera for every item |
| Completeness | Depends on the inspector's own checklist and the time available. | Software checks every item on the Ridgescan Standard against its evidence before anyone leaves the property. A gap gets filled while the crew is still there.Captured with: The Ridgescan app, scoring on site |
| Who signs | The person who walked the house; certifications vary from inspector to inspector. | A certified home inspector reviews every finding against the evidence and signs with their certification id. The AI drafts; a person signs.Captured with: Remote review on a laptop |
| Report timing | One to three days. | Same day, reviewed and signed. Your contingency clock keeps its days.Captured with: The engine drafts; the inspector signs from a laptop |
| What a finding says | Often a line like "recommend further evaluation by a qualified contractor." | The photo, the thermal image, the reading, the location, a priority (Safety, Major, Maintenance, Monitor) and the licensed or registered trade to call.Captured with: Every tool above, tied to the item |
| For your agent | A PDF to read through and summarize. | A repair-request summary: Safety and Major items with location and trade, ready for an addendum. Quotes from independent contractors on request, with no fee to Ridgescan. |
| Time on site | About 2½ to 4 hours for a typical Treasure Valley home, then 1 to 2 hours writing the report that evening.* | About 2 to 2½ hours with the full set of tools, or 60 to 90 minutes for an agent capturing the interior; no writing on site. The engine drafts and the inspector reviews remotely in about 30 to 45 minutes.*Captured with: the app doing the deciding and the note-taking |
| After repairs | Book another inspection. | A flat-fee re-inspection of the flagged items only, with before-and-after in one record. |
What each row is captured with is on our recommended-tools list; Ridgescan sells and leases no hardware. * Time estimates are projections for a typical Treasure Valley home, built from the capture steps; we will publish measured times from completed jobs. "Typical" describes the visual standard of practice most inspections are written to and common practice in the Treasure Valley; individual inspectors vary. Thermal imaging and instrument readings indicate conditions that warrant confirmation; they are not a diagnosis.
| Safety | Kitchen GFCI didn't trip on testKitchen counter · licensed electrician | $120–250 |
| Major | Bath exhaust venting into the atticAttic above primary bath · HVAC technician | $300–600 |
| Major | Elevated moisture, thermal anomalyGuest bath wall · licensed plumber | $500–3,000 |
| Maint. | Negative grading at NE cornerExterior · general contractor | $300–1,200 |
| Monitor | Water heater at 9 yearsGarage · budget for replacement | — |
Priced per transaction, with tiers by volume. Contact us for numbers that fit your office, or read how the program runs end to end.
The Ridgescan app on the agent's phone, a 360° camera and a handheld thermal camera. Ridgescan adds the drone and the crawlspace rover on full-service jobs.
A capture before the home goes to market, a prioritized list of what a buyer's inspector will flag, and repair quotes from an independent registered GC (no fee to Ridgescan, disclosed in writing).
Safety and major items with location and requested action, ready to paste into an addendum. Budgetary ranges so your client can negotiate with a number.
Yes. It's an inspection at a disclosed scope, reviewed and signed by a certified home inspector. The report states its scope on the first page. The app won't let a job close with gaps, so the scope is the same every time.
Our estimate for a typical Treasure Valley home is 60 to 90 minutes for the interior with a phone, a 360° camera and a thermal camera, which fits inside a listing appointment. A traditional inspection is about 2½ to 4 hours on site plus report writing that evening. The app walks the agent item by item and shows what's left; nothing has to be scheduled with an inspector first. Estimates built from the capture steps, not yet measured on completed jobs.
A certified inspector reviews the capture remotely, edits the AI's draft findings, and signs. The report is delivered the same day. Nothing is delivered without that signature; the software has no other path.
A phone with the Ridgescan app for guided photos and tests, plus two tools: a 360° camera and a handheld thermal camera. Drone and crawlspace rover captures are added by Ridgescan on full-service inspections. Ask us for the recommended-tools list for your office.
Yes. The seller or listing agent authorizes every capture in the app before it starts, and that authorization is recorded with the job.
Per transaction, with tiers by volume. Book a demo and we'll walk through it with real numbers for your office.
Tell us about the property and when you need the report. We'll confirm a time by email.