A capture of each lot before each municipal inspection, scored against the list the inspector will walk, with every finding routed to the trade that owns it. One record per home shows where each lot stands against the schedule and how each sub's work holds up across the community.
Will this lot pass? Is the build on schedule? Are the subs doing the work right? Today the answers arrive as a failed inspection, a slipped closing, and a warranty call. A capture per lot per phase answers them while there is still time to act.
Each phase is a capture against the same list, on the same record. Pre-drywall and delivery are the core program; pre-pour is there when the lot calls for it. The 11th-month warranty inspection is the owner's to book, and the record makes it a fair one. We check readiness against the items the inspector will look at; the municipal inspector still decides, and our reports never certify code compliance.
Footings, forms, rebar, under-slab plumbing and vapor barrier before concrete hides them.
Framing, rough plumbing, electrical and HVAC in 360° of every room, scored against the items the municipal inspection checks, the day before the inspector comes. Findings go to the trade that day; the capture becomes a permanent map of what's inside the walls.
The finished home, full set of tools: drone, thermal, 360° and rover. Signed report to the buyer; the house's day-one condition on the record.
The owner books it, not the builder. We remind them a month before their workmanship warranty ends, and the delivery baseline makes their claim, and your answer, a matter of record.
Every phase, every photo, thermal frame and 360°, on one versioned record for the home. Pull it for a warranty question, a resale, or the next community's checklist.
Every inspection gets the full set of tools, at one price. The person holding it changes, the standard doesn't: a Ridgescan inspector, an agent with the office's tools, or a licensed inspection company running the Ridgescan Standard on its own jobs. Each layer adds something a person standing in the room can't see.
The Standards of Practice call for a visual inspection of what's readily accessible. Roofs get viewed from the ground, crawlspaces get "limited access" in the report, and what's behind the walls stays a guess.
A drone flies the whole roof. Steep, wet or high roofs are flown, not skipped, and gutters, grading and drainage get the same view. Flown by an FAA Part 107 certified remote pilot.
A handheld radiometric thermal camera on every wall, ceiling and system. Moisture, insulation gaps and hot circuits show up as temperature. Every image carries the data, not just the picture.
A rover drives the full crawlspace: foundation, framing, plumbing, ducts and moisture, in spaces a person can't safely enter. Standard on every job, not an add-on.
A 360° of every room. The inspector can revisit any corner during review, and you keep a record of the house as it was on inspection day.
Every capture is scored against the Ridgescan Standard while the crew is still at the property. A missing test or photo is a prompt on the phone, not a footnote in the report.
The inspection list is the source of truth. Every prompt on the phone, every completeness check, every finding and every line of the report comes from the same schema, built on the Ridgescan Standard (every item in the InterNACHI Residential Standards of Practice, plus instrument readings, thermal and subsurface capture). AI scores the capture and drafts the findings. A certified inspector reviews and signs. Nothing is delivered without that signature.
The app tells the person on site exactly what to capture, and won't close the job with gaps.
AI checks every item for the evidence it requires: photos, 360°, thermal, readings and tests.
Flagged items are drafted in plain language with the photo, thermal image and location.
A certified home inspector edits, approves and signs. Then, and only then, it's delivered.
A typical home inspection is a visual look at what is readily accessible, written to a trade-association standard. Ridgescan follows every item in that standard and then goes where eyes can't: over the roof, under the floor, behind the drywall, and into the numbers.
| Typical inspection | Ridgescan | |
|---|---|---|
| The standard | A visual standard of practice (InterNACHI or ASHI). Idaho doesn't require home inspectors to be licensed, so the standard is whatever the inspector chooses to follow. | The Ridgescan Standard: every item in the InterNACHI Residential Standards of Practice, plus instrument readings, a thermal sweep, 360° of every room and the crawlspace rover. The same list on every job. |
| Roof | Viewed from a ladder, the eaves or the ground. Steep, wet or tile roofs are often "not walked". | Drone flight over the whole roof, every time: coverings, flashing, penetrations, gutters, chimney, from above.Captured with: Drone, flown by an FAA Part 107 remote pilot |
| Crawlspace | Entered if there is room and it is dry. "Limited access" is a common line in the report. | The rover drives it end to end: foundation, piers, framing, plumbing, vapor barrier, wood-soil contact, moisture.Captured with: Crawlspace rover, driven from a tablet; a 360° camera at the access where there is no rover |
| Behind walls and ceilings | Not inspected. Visual only. | Radiometric thermal sweep of every wall, ceiling and system. Moisture, missing insulation and overheating circuits show up as temperature, then get confirmed with a moisture meter.Captured with: Handheld radiometric thermal camera; pin moisture meter to confirm |
| Systems that have numbers | "Operated with normal controls." Judged by observation, not measured. | Measured and recorded against a normal range: heating rise and cooling split, static water pressure, CO at every fuel-fired appliance, moisture at every anomaly. The numbers print in the report.Captured with: Water pressure gauge, infrared thermometer, CO meter, manometer, moisture meter |
| Electrical tests | Representative outlets tested; the panel opened if safe. | Every reachable GFCI and AFCI tested and the result recorded; the panel photographed cover off; thermal on the panel and breakers.Captured with: GFCI/AFCI outlet tester; phone camera; thermal camera on the panel |
| Documentation | Photos of what the inspector chose to photograph. | 360° of every room, every photo and thermal frame, each tied to the item it covers and kept on record. An evidence record, not an album.Captured with: 360° camera, one capture per room; phone camera for every item |
| Completeness | Depends on the inspector's own checklist and the time available. | Software checks every item on the Ridgescan Standard against its evidence before anyone leaves the property. A gap gets filled while the crew is still there.Captured with: The Ridgescan app, scoring on site |
| Who signs | The person who walked the house; certifications vary from inspector to inspector. | A certified home inspector reviews every finding against the evidence and signs with their certification id. The AI drafts; a person signs.Captured with: Remote review on a laptop |
| Report timing | One to three days. | Same day, reviewed and signed. Your contingency clock keeps its days.Captured with: The engine drafts; the inspector signs from a laptop |
| What a finding says | Often a line like "recommend further evaluation by a qualified contractor." | The photo, the thermal image, the reading, the location, a priority (Safety, Major, Maintenance, Monitor) and the licensed or registered trade to call.Captured with: Every tool above, tied to the item |
| For your agent | A PDF to read through and summarize. | A repair-request summary: Safety and Major items with location and trade, ready for an addendum. Quotes from independent contractors on request, with no fee to Ridgescan. |
| Time on site | About 2½ to 4 hours for a typical Treasure Valley home, then 1 to 2 hours writing the report that evening.* | About 2 to 2½ hours with the full set of tools, or 60 to 90 minutes for an agent capturing the interior; no writing on site. The engine drafts and the inspector reviews remotely in about 30 to 45 minutes.*Captured with: the app doing the deciding and the note-taking |
| After repairs | Book another inspection. | A flat-fee re-inspection of the flagged items only, with before-and-after in one record. |
What each row is captured with is on our recommended-tools list; Ridgescan sells and leases no hardware. * Time estimates are projections for a typical Treasure Valley home, built from the capture steps; we will publish measured times from completed jobs. "Typical" describes the visual standard of practice most inspections are written to and common practice in the Treasure Valley; individual inspectors vary. Thermal imaging and instrument readings indicate conditions that warrant confirmation; they are not a diagnosis.
| Safety | Kitchen GFCI didn't trip on testKitchen counter · licensed electrician | $120–250 |
| Major | Bath exhaust venting into the atticAttic above primary bath · HVAC technician | $300–600 |
| Major | Elevated moisture, thermal anomalyGuest bath wall · licensed plumber | $500–3,000 |
| Maint. | Negative grading at NE cornerExterior · general contractor | $300–1,200 |
| Monitor | Water heater at 9 yearsGarage · budget for replacement | — |
A full capture of the finished home at closing: drone over the roof, thermal on every wall and ceiling, 360° of every room, and the rover through the crawlspace. The buyer gets a signed report, and you get a documented baseline of the house on day one.
It gets them ready for it. The day before each municipal inspection we capture the lot and score it against the items that inspection checks: nail plates, straps and blocking at framing, slope and support at rough plumbing, box fill and clearances at rough electrical, duct connections and clearances at HVAC. Anything open goes to the trade with the photo and the location so it is fixed before the inspector walks it. The inspector still decides, and our reports never certify code compliance; what you get is no surprises.
Every capture stamps the phase as reached on that lot's record. The community view lists each lot against the plan: ready for its next inspection, waiting on a trade with the open items named, or behind by so many days. It updates when the capture happens, not when someone remembers to update the spreadsheet.
Every finding carries the trade that owns it, the lot, the phase and how long it took to clear. Across a community that becomes a per-sub record: what they miss, how often, and how fast they fix it. It is the same list on every lot, so a framer who misses the same detail on four lots shows up as a pattern, with photos, before the next contract.
The owner does; it's their warranty and their house. We remind every owner we delivered a report to about a month before their one-year workmanship coverage ends, and they book it with us or with anyone they like. What the builder gets is the delivery baseline: when a claim comes in, the condition at closing is on record, with photos, so the conversation is about what changed rather than what was there.
Pre-pour (footings, forms, rebar, under-slab plumbing, vapor barrier), pre-drywall (framing and every rough-in), and delivery at closing with the full set of tools. Pick the phases per community; pre-drywall and delivery are where the value sits.
Ridgescan crews on site, with a certified inspector reviewing and signing every report. Flagged items are referred to the right licensed trade with the photo, thermal image and location attached.
Per home, per phase, with a rate by community volume. Book a demo and we'll price it for your delivery schedule.
Tell us about the property and when you need the report. We'll confirm a time by email.