RidgescanAI
Learn

What a Ridgescan inspection includes.

The standard, the tools on top of it, what happens on the day, and what arrives that evening.

A home inspection in Idaho can mean a lot of things, because Idaho doesn't require home inspectors to be licensed. Ridgescan fixes the definition: every job follows the Ridgescan Standard, every job gets the same tools, and every report is reviewed and signed by a certified home inspector. One standard, every job.

The standard

The Ridgescan Standard lays out what a home inspection covers: roof, exterior, basement, foundation, crawlspace and structure, heating, cooling, plumbing, electrical, fireplace, attic, insulation and ventilation, doors, windows and interior. It describes a non-invasive, visual inspection of readily accessible systems and components, with specific items to inspect and specific things to report under each heading.

Ridgescan treats that list as a checklist, not a guideline. Each item has a defined piece of evidence: a photo, a 360° frame, a thermal frame, a reading, or a test result. The capture app shows every item and marks it done or missing. Before anyone leaves the property, the AI completeness check scores the capture against the full list and points at any gap. A job can't close with one.

What the tools add

The standard describes what a person can see from where a person can stand. Ridgescan brings four instruments to every full-service job so the report isn't limited to that.

  • Drone over the roof and envelope. Every plane, ridge, valley, flashing and penetration, plus gutters, grading and the service drop, flown by an FAA Part 107 remote pilot. Steep, wet or high roofs are flown rather than viewed from the ground. The drone is a camera; it is visual only.
  • Handheld radiometric thermal camera. Every wall, ceiling, electrical panel and supply register. Each frame stores a surface temperature for every pixel, so the reviewing inspector works from data rather than a colored picture. Anything that looks like moisture gets a meter reading next to it.
  • 360° capture of every room. One per room and level. The inspector can revisit any corner during review, and you keep a record of the house as it was on the day.
  • Crawlspace rover. A tracked camera platform drives the full crawlspace: foundation walls, framing, plumbing, ducts, vapor barrier and standing water, including the parts a person can't safely reach. It's standard, not an add-on.

Everything the instruments produce is labeled Beyond SoP in the report, so you can see what's part of the standard and what's extra. See how to read your report.

Inspection day

On a full-service job a Ridgescan crew comes to the property. The seller or listing agent authorizes the capture in the app before it starts, and that authorization is stored with the job. The crew works through the house in the app's order, running the guided tests as they go: GFCI trips, two-fixture flow, hot on the left at every faucet, the furnace and air conditioner operated, the garage door reversal, the water heater's relief valve and straps.

On an agent-run job, a brokerage's agent does the capture with the Ridgescan app, a 360° camera and a handheld thermal camera, at a disclosed scope that the report states on its first page. Ridgescan adds the drone and rover on full-service jobs. Either way the AI completeness check runs before anyone leaves, and either way a certified inspector reviews and signs.

You don't need to be there. If you'd like to walk through with the crew at the end, say so when you book.

The report

The report is delivered the same day, after the inspector has reviewed the capture, edited the AI's draft findings, and signed. It contains:

  1. A scope statement on page one: what was inspected, to which standard, by whom.
  2. A plain-language summary.
  3. A repair-priority matrix: every finding tagged Safety, Major, Maintenance or Monitor, with budgetary ranges that are planning numbers rather than bids.
  4. Every system in the order of the standard, each item marked IN, D, NI or NP, with observation, location, implication and recommendation, and the photos, thermal frames, rover stills and 360° views tied to each.
  5. A referral for every deficiency to the right licensed trade: electrician, plumber, roofer, HVAC technician, structural engineer, general contractor, chimney sweep or garage door technician.
  6. A repair-request summary of the Safety and Major items for your agent to work from.
  7. The inspector's sign-off block, with name, certification number and time of signature.

If you want numbers to negotiate with, the findings can go to an independent registered general contractor for a written estimate. Ridgescan takes no fee from that contractor, and that's disclosed wherever quotes appear. Have a look at the sample report to see all of this on the page.

What isn't included

A home inspection is not technically exhaustive, is not a code-compliance inspection, is not a warranty, and can't find what's concealed inside a finished wall or under a slab. Thermal shows surface temperature, not what's behind the surface. Well, septic and sewer-scope work are separate services. Radon testing is coming soon, once our measurement certification is in place. Prices are by square footage with every tool included; contact us for a quote.

Get started

Book an inspection.

Tell us about the property and when you need the report. We'll confirm a time by email.

  • Emailhello@ridgescan.ai
  • Based inEagle, Idaho · serving the Treasure Valley
  • Certified inspectorsReview and sign remotely with Ridgescan. Ask us how.
We'll only use your email to reply to this request.