Plain-language guidance for buyers and agents. A sewer scope is a separate service from a home inspection and is done by a plumber or a drain specialist with a camera.
What a home inspection covers
The inspector runs water at the fixtures, flushes toilets, and watches for slow drains, gurgling and backups. The Ridgescan Standard records the drain function test and any sign of a problem at the cleanout. That catches a line that is already failing. It cannot see a line that is cracked, root-bound or bellied but still draining today, which is the usual state right up until it isn't.
Which houses need one
- Anything built before the mid-1980s. Clay, cast iron and Orangeburg (a tar-impregnated fiber pipe) all fail with age; roots find the joints.
- Mature trees between the house and the street. Roots follow water. A big tree over the line is reason enough on its own.
- Any sign in the inspection: a slow drain on the lowest floor, a gurgling floor drain, a cleanout with a wet ring around it, a patch of lawn that is greener than the rest.
- Additions and remodels where the line may have been extended, re-routed or cut into without a permit.
- Newer houses after rough grading or heavy equipment on the lot: crushed or separated pipe under the driveway is a known new-construction defect.
What the video shows
The technician pushes a camera from the cleanout to the city tap or the septic tank and records the run with a distance counter. The common findings are: roots at a joint (cut and treat, or replace the section), offset joints (soil movement, usually clay pipe), a belly (a low spot that holds water and solids), scale and corrosion in cast iron, and a break or collapse. Ask for the recording and the distance of each finding so a second contractor can quote the same thing.
Reading the quote that follows
A scope is often done by a company that also repairs, so read the recommendation with that in mind. "Replace the whole line" and "spot repair at 42 feet" are very different numbers; the video tells you which is true. Trenchless lining is an option for some pipes and not others. Get a second quote on anything over a spot repair. From a Ridgescan report, Safety and Major plumbing findings can go to more than one vetted contractor at once, with no fee to Ridgescan from either side.
Timing
Same day as the inspection when possible; the scope takes about an hour and the recording is immediate. It fits inside any contingency window if it is booked when the inspection is.
Where Ridgescan fits
A sewer scope is not part of the Ridgescan Standard today; it is one of the conditional modules on our roadmap. The report records the drain function test and tells you when the house's age, trees or symptoms make a scope worth ordering, and a flagged drain item is referred to a licensed plumber.