RidgescanAI
For brokerages & agents · leave-behind

What an agent carries.

What your agents carry, how a capture works, and what comes back the same day. Every agent-run capture is an inspection at a disclosed scope, reviewed and signed by a certified home inspector.

One standard, every jobSigned by a certified home inspectorSame-day report
What an agent carries

Three things an agent carries. Two things Ridgescan brings.

It fits in a bag. The app does the thinking about what to capture; the cameras do the seeing.

The Ridgescan app

On the agent's own phone. It lists every item in the standard, says what evidence each one needs, runs the guided tests, and won't let the job close with a gap. Works with no signal and syncs later.

A 360° camera

One capture per room and level. The reviewing inspector can look at any corner of the house during review, and the client keeps a record of the home as it was that day.

A handheld radiometric thermal camera

Every wall, ceiling, panel and register. Each frame carries a temperature value per pixel, so the inspector reviews data, not just a colored picture.

Our estimate for the interior capture is 60 to 90 minutes on a typical home, inside a listing appointment (an estimate from the capture steps; measured times will follow). The roof and the crawlspace are on every job, and nobody from Ridgescan comes to the showing. The rover is driven from a tablet and is on our recommended-tools list; Ridgescan doesn't sell or lease hardware. The drone needs an FAA Part 107 remote pilot, a short online certificate; one pilot per office is enough. Until an office has one, the roof is covered from the ground and the attic and the report says so on its scope line. An iPhone Pro's lidar or a brokerage's Matterport can add a room scan.

Cameras and scanners

What you get from each device.

Some brokerages already own a Matterport. Some agents have an iPhone Pro with lidar in their pocket. A 360° camera is the cheapest way to get every room on record. Here is what each one adds to the report, and what Ridgescan does with it.

TypicalWith Ridgescan
Phone onlyPhotos of what the person chose to photograph.The app asks for a specific photo for every item on the standard, scores each one on site and tells you to retake a bad one while you're still in the room. A complete inspection at a stated scope.
360° cameraA virtual tour for the listing.One capture per room, tied to the room and the items in it. The inspector revisits any corner during review; the engine judges every item from the frames; the buyer keeps the house as it was that day.
iPhone Pro lidarA room scan in a scanning app, kept on the phone.A room scan beside each 360°: a floor plan with measured room dimensions and square footage, findings pinned to where they are, and a dimensional record of the house. No new hardware if the phone is already in the bag.
MatterportA tour and, on the lidar model, a floor plan, for marketing.If the brokerage already has one, its tour links to the job and its floor plan stands in for the lidar scan. Ridgescan adds what the tour doesn't have: the standard, the readings, the thermal sweep, the findings, and a signed report.
Thermal cameraRarely carried.A sweep of every wall, ceiling and system; anomalies confirmed with a moisture meter and reported as what was measured.
Drone and roverNot part of a typical inspection.On every Ridgescan job: the whole roof from above and the crawlspace end to end. Flown by a Part 107 pilot and driven from a tablet, by whichever operator holds the tools: a Ridgescan inspector, a brokerage's own pilot with the office's tools, or a licensed inspection company on its own jobs.

A tour shows a house. Ridgescan measures it, judges it against a standard and signs the result, on one record per home. Square footage from a scan is stated with its method and tolerance; it is not an appraisal.

How a capture works

Four steps. One showing.

No inspector appointment to wait on. The agent captures when they're already at the property.

Seller authorizes in the app

The seller or listing agent authorizes the capture and accepts the terms before anything is photographed. The app won't open a room without it, and the authorization is stored with the job.

Guided capture, item by item

The app walks the agent through every item in the Ridgescan Standard: the photo, the 360°, the thermal frame, the test. Each item shows done or missing.

AI completeness check before leaving

Before the agent leaves, the AI scores the capture against the full list and points to any gap. A missing test is a prompt on the phone, not a footnote in the report.

A certified inspector reviews and signs

A certified home inspector reviews the capture remotely, edits the AI's draft findings, and signs. The report is delivered the same day. There is no other path.

Either side of the deal

Leverage for the buyer's agent. Protection for the listing agent.

Same capture, same report. What changes is what you do with it.

Buyer side · leverage

  • Know before contingencies run out.Capture during the showing or right after acceptance. The signed report is back the same day, well inside the inspection period in the purchase agreement.
  • Repair requests with evidence attached.Every finding carries a photo, a thermal frame and a location. The report includes a repair-request summary written to lift into an addendum.
  • A number to negotiate with.Budgetary ranges for planning, and written quotes on request from an independent registered general contractor. Ridgescan takes no fee from the contractor.
  • The right trade, named.Electrician, plumber, roofer, HVAC technician or structural engineer. Your client knows who to call.

Listing side · protection

  • Find it before the buyer's inspector does.Fix, credit or disclose on your seller's terms, with documented condition behind the asking price instead of a surprise at day ten.
  • Disclosure built on evidence, not memory.Idaho's Property Condition Disclosure Act puts the duty to disclose on the seller. Agents carry their own duty for adverse material facts they know about. A signed report gives both of you something concrete to disclose from.
  • Fewer renegotiations.Buyers who can see the house's condition up front write cleaner offers and ask for less after the fact.
  • Pre-listing advisory.A capture before the home goes to market, a prioritized list of what a buyer's inspector will flag, and quotes for the items worth fixing first.
What the report contains

Scope on page one. Evidence on every finding.

Ridgescan AI · Eagle, Idaho · hello@ridgescan.ai · ridgescan.ai/agents. Idaho doesn't require home inspectors to be licensed; every Ridgescan report is reviewed and signed by a certified home inspector.

Get started

Book an inspection.

Tell us about the property and when you need the report. We'll confirm a time by email.

  • Emailhello@ridgescan.ai
  • Based inEagle, Idaho · serving the Treasure Valley
  • Certified inspectorsReview and sign remotely with Ridgescan. Ask us how.
We'll only use your email to reply to this request.